Skip to main content

Safety, Handling, and ESD

Safety Warnings​

JTA-01 is a professional flight control device. Improper use can result in:

  • Loss of vehicle control
  • Damage to property
  • Personal injury

Always observe the following safety rules:

  • Remove propellers before configuration or bench testing
  • Do not power the system with motors connected during setup
  • Perform firmware configuration and calibration in a controlled environment
  • Verify failsafe behaviour before flight

JTA-01 does not include mechanical safety interlocks. Safe operation depends on correct system integration and configuration.

ESD and Handling Precautions​

JTA-01 contains sensitive electronic components that can be damaged by electrostatic discharge.

Recommended precautions:

  • Handle the board only by its edges
  • Avoid touching exposed connectors and components
  • Use ESD-safe work surfaces and wrist straps where possible
  • Store the unit in anti-static packaging when not installed

Do not operate or store the unit in environments with excessive moisture, conductive dust, or corrosive vapours.

Power and Polarity Precautions​

  • Always verify power source voltage before connection
  • Never reverse power polarity
  • Use only regulated power sources within the specified voltage range
  • Do not hot-plug high-current power connectors

Incorrect power application can permanently damage the flight controller and connected peripherals.